• Thickness: 1.5mm - 5.0mm
• Width: 20mm - 200mm
• Refractoriness: 450°C

• Thickness: 1.5mm - 5.0mm
• Width: 20mm - 200mm
• Refractoriness: 450°C

• Thickness: 1.5mm - 5.0mm
• Width: 1000mm
• Refractoriness: 450°C

• Thickness: 1.5mm - 5.0mm
• Width: 1000mm - 1500mm
• Refractoriness: 500°C

GC-605 Expanded Telflon Ribbon(Expanded PTFE)

• 100% Teflon products Possess all the properties of Teflon, resistant to all the corrosive media.
• Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing super face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
• Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
• Pressure resistance: 19.6MPa. Temperature resistance: -286°C - 315°C
• Easy use and replacement: Just cut a certain length of the sealing ribbon and put it on the target surface, any formed and sized sealing ring may be obtained only if its two ends are connected. Thanks to its not being sticky to the surface it is extremely easy to replace it.
• Wide service scope: Can replace any asbestos-rubber gasket, steel-armoured gasket, metallic gasket, twining gasket, graphite filler and many other sealing materials. May used in diverse pipelines to seal flanges, enamellde products, glass, rubber products, plastics, non-rusting graphite lining tower, heat-exchanger, pressure container as linings and to sea their flanges, to seal the fillers of diverse pumps and valves and to seal such heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too tighting force.
• Good interchangeability. Just to have some kinds of ribbons with general specifications, numerous demands can be met. Very easy procedure to store and purchase.

GC-606 Expanded Teflon valve rod filler

• Expanded Teflon valve rod filler ix another brand-new product of expanded Teflon materials. It has all the features for expanded Teflon sealing ribbons. It has a round cross section. Used to seal the filler of the valve rod.
• Automatic molding, speedy and easy mounting and filling. Like twining a spring, twine it on the valve rod, then press the cover, and the filler will be formed automatically, gibing a complete and precisely compact sealing ring without any additional processing.
• Pressure working: 19.6MPa
• Temperature working: -248°C - 315°C
• Superior-filling performance allows filling up the defects, which may create leakages. Superior sealing performance as well.
• Very strong interchangeability: just to have products with several typical specifications, they can replace many kinds of similar design-finalized asbestos packing.
• Ageing-resistant, every to purchase and store.